High Temperature Lubricants
Showing 1–8 of 62 results
-
![]()
MORE INFOAvilith Grease EP
Sloan Avilith Grease EP is an advanced grease made from highly refined petroleum oil, thickened with lithium hydro stearate thickener, extreme pressure/antiwear additives and antioxidants. It gives outstanding low torque, long lubricant life. In addition it provides high load carrying ability and corrosion protection for a wide temperature range of service.
-
![]()
MORE INFOAvilith Grease-M
Sloan Avilith Grease-M is an advanced grease made from highly refined petroleum oil, thickened with lithium hydro stearate thickener, fortified with micronised molybdenum disulphide, graphite, extreme pressure/antiwear additives and antioxidants. It gives outstanding low torque, long lubricant life. In addition it provides high load carrying ability and corrosion protection for a wide temperature range of service.
-
![]()
MORE INFOBentop HV Grease
Bentop HV Grease is advance grease made from highly refined ISO VG 220 mineral oil, extreme pressure/antiwear additives and antioxidants. It gives outstanding low torque, long lubricant life. In addition it provides high load carrying ability and corrosion protection for a wide temperature range of service.
-
![Bentop-ND-Grease]()
MORE INFOBentop ND Grease
Bentop ND Grease is smooth textured grease that has outstanding heat resistance since its thickener will not melt. The consistency of the grease remains constant throughout a wide temperature rang. This grease is organo ? modified clay dispersed in a mineral oil, interpreted by antioxidants and extreme pressure additives.
-
![]()
MORE INFOBrugarolas BESLUX MOLYSPRAY
BESLUX MOLYSPRAY builds a completely homogeneous, adhesive, long life lubricating film, which resists high pressures and strong temperatures variations. Thus, it provides better sliding and reduces the friction coefficient. It is used for the lubrication of spindles, guides, screws, sliders, axles, bolts, and hardly reachable mechanisms.
BESLUX MOLYSPRAY avoids residues and dust particles adhesion to the sliding surfaces, mainly in the textile industry. Therefore BESLUX MOLYSPRAY is suitable to lubricate width adjusting spindles in tensing tenters.
Dry film spray lubricant with Molybdenum Bisulphide intended for service Temperatures up to 450? C.
APPLICATION
Prior to BESLUX MOLYSPRAY spraying, clean the metallic surfaces. Hold the can about 25-30 cm distance from the part to be sprayed over. After using hold the can upside down until the exhaust of pure gas. This process will avoid the plugging and drying of the spraying nozzle.CAUTIONS
The normal ones when using spray lubricants.
Protect eyes efficiently and avoid vapors inhalation.
DO NOT SMOKE WHEN USING. Can under pressure, do not hole, neither heat or place near a flame, even when empty. -
![]()
MORE INFOBrugarolas BESLUX RAMCA 320
SYNTHETIC OIL FOR HIGH TEMPERATURE LUBRICATION
BESLUX RAMCA 320 it?s?solid-free? synthetic oil for high temperature and heavy loads lubrication. Builds a transparent lubricating film with excellent load carrying capacity, even at extreme temperatures.
BESLUX RAMCA 320 leaves practically no residues, even when is overheated. Neither hard carbon residues nor lacquers are produced on central lubrication systems, plain bearings, joints, etc….
BESLUX RAMCA 320 gives an excellent lubrication capacity, reduces friction and protects against corrosion and wear, at temperatures till 230 ?C.
Due to its superior lubrication capacity, adherence and thermal stability, BESLUX RAMCA 320 gives outstanding results when compared with others mineral or synthetic oils.
CHARACTERISTICS
? High thermal stability
? Low residues building
? Residues are soluble in fresh oil; no hard carbon
? Reduces friction; protects against wear
? Does not build depsits; solids free
? Good pumpability; suitable for central lubrication systems
? High viscosity index; low viscosity-temp. Variations
? Compatible with mineral oils
? High adhesion capacity; low consumption
? Service temp till 230 ?C
