Showing 1–8 of 16 results
Bentop ND Grease
Bentop ND Grease is smooth textured grease that has outstanding heat resistance since its thickener will not melt. The consistency of the grease remains constant throughout a wide temperature rang. This grease is organo ? modified clay dispersed in a mineral oil, interpreted by antioxidants and extreme pressure additives.
Brugarolas G. Beslux Liplex M-1-2-S
G. BESLUX LIPLEX M 1-2/S is a high performance lubricating grease capable of working in a wide range of temperatures (from -40 to 180?C) in very stringent operating conditions.
Specially formulated with a synthetic base oil provided with high chemical and thermal resistance and a high lubricating capacity, special lithium complex soap thickened, with a high drop point and outstanding stability to mechanic work.
G. BESLUX LIPLEX M 1-2/S additives package is provided with excellent antiwear, lubricating and E.P. properties together with high anticorrosive and antioxidant capacity. Then it is capable of operating when exposed to water and vapor in extreme working conditions.
INTENDED FOR HIGH TEMPERATURES (180?C) OPERATED BEARING (200?C PEAK TEMPERATURE), FOR BEARINGS UNDER LOAD, WATER AND VAPOR EXPOSURE. VERY SUITABLE FOR DRYERS BEARINGS IN THE PAPER INDUSTRY AND FOR BEARINGS AND MECHANISMS IN THE STEEL, CEMENT INDUSTRY ETC.
- High compatibility with plastics andelastomers.
- Resistance to shearing.
- Reduction of the regreasing frequency.
- Less break-downs.
- Outstanding quality-efficiency-price relation.
- Possibility of unifying the products.
Brugarolas G. Beslux Plex Bar L-2-S
LOW TEMP AND HIGH SPEED SYNTHETIC GREASE
Complex soap thickened synthetic grease provided with high resistance to oxidation, superior anticorrosive capacity, E.P. characteristics, good adherence to metal and good resistance to water, vapor, acid and alkaline solutions.
INTENDED FOR HIGH SPEED BEARINGS OPERATED IN WET AMBIENCE. SPECIALLY DESIGNED FOR SPINDLES, CAMS, JOINTS, TURBINES ETC.
Circulation Oil-HP is premium quality general circulation oil. Circulation Oil-HP is formulated from solvent refined high viscosity index paraffinic base stock combined with anti-wear, anti-oxidant, anti-rust and anti-foam additives, to ensure protection against, wear and high temperature operations.
- ?Excellent high temperature chemical and oxidation stability
- ?Excellent wear protection for longer equipment life
- ?Superior rust an corrosion protection
- ?Long fluid life
Circulation Oil-HP is recommended for lubrication of plain bearings, anti-friction bearings and parallel shaft gears in heavy industry applications. It can also be used in worm gear lubrications where load to moderate. Circulation Oil-HP can also be used in hydraulic system and compressor applications where recommended.
Circulation Oil-HP has a superior load carrying ability giving better wear protection and longer machine life. Circulation Oil-HP has high thermal stability ensuring deposit, sludge and varnish free system. Circulation Oil-HP gives superior rust protection and is readily demulsifiable from water in system reservoirs.
CONTACT GREASE – CU
Electrical contacts are often manufactured from relatively soft materials, which are subject to wear. Additionally the contact surface oxides, increasing resistance, there is a special product for lubricating electrical contacts.
Contact Grease ? CU contains copper particle which is used when you need particles (conductive) to assist in oxide breakup and you require good lubrication and abrasion. Example: disconnect switches or large connectors and relays.
- ?Has a good lubricating property, even with heavy wiping contacts
- ?Lowers resistance across contacts
- ?Prevents tracking and shorting out
- ?Eliminates arcing
- ?Loosens and softens oxide films
- ?Is not harmful to plastics and rubbers
- ?Protects metal parts against corrosion
While some of the above points may seem contradictory, in practice they are not. In a closed contact, the film of lubricant is thinly squeezed. Because it is so thin, the current passes freely through the Contact Grease – CU film across the contact. In fact, because the Contact Grease ? CU takes up irregularities in the surface of the contact resistance is lowered and effective contact area is increased. When the contact begins to open, some of the grease strings across the gap, forming bridges. As this happens, the electrical resistance increases. It is also this effect of reducing the flow of current, which eliminates arcing. Thus while Contact Grease ? CU does not normally allow current to flow through it, in the thin film squeezed between contacts it allows the current to flow freely.
G. BESLUX GRAFOL AL PASTE
ANTISEIZE PASTE FREE COPPER
Antiseize and anticorrosive paste. intended for the protection of any type of screw, bolt, threaded connections as well as for endless screw, etc. also suitable as a anti-adherent paste on aluminium die casting.
- ? Special product intended for very high temperature whenever there is corrosion, seizing, scoring and generally seizing of threaded joints.
- ? Protects from scoring, corrosion, seizing etc.
- ? Makes easier the setting and unsetting of the parts.
- ? Excellent properties conduct electric current.
- ? Allows to recover and re-use the parts with the consequent saving in spare parts.
- ? Resists high loads thanks to its solid lubricants content.
- ? Long life and efficiency.
- ? Resists temperatures up to 1180? C (without contact with air)
WAY TO USE
Manual with brush etc. direct onto the surface to be protected.
Does not need previous treatments. Apply on clean surface to avoid that dust, grease etc. make the adhesion difficult.